All calculators

Wall Paint

Work out litres of paint, tins and buckets for your walls. Check the coverage printed on the tin for your brand.

Step 1 · New to this? Start here

The basics

Paint is worked out from the area you are covering. Find the wall area, take away doors and windows, then multiply by the number of coats.

Every paint tin tells you its coverage, how many square metres one litre covers. Divide the total area by the coverage and you have the litres you need.

A small allowance for wastage (10%) covers what stays in the tray, the roller and uneven walls.

Paintable area
Wall length x height, minus doors and windows.
Coats
Most walls need 2 coats. New plaster often needs a primer or undercoat first.
Coverage
m² per litre, printed on the tin. Emulsion is often around 8 to 12 m²/L.

Step 2

How to use this calculator

  1. 1Enter the total length of the walls to paint. For a room, use the perimeter.
  2. 2Enter the wall height.
  3. 3Add up the area of doors and windows and enter it.
  4. 4Enter the number of coats and the coverage from the tin.
  5. 5Read the litres, then the number of 4 L tins or 20 L buckets to buy.

Step 3 · Enter your numbers

Results

Paint needed
10 litres
Paintable area
44.60 m²
4 L tins
3 tins
or 20 L buckets
1 buckets

Estimates for learning and planning. Always confirm quantities with your engineer or quantity surveyor.

Step 4 · Check your understanding

Worked example

Paint the inside of the 4 m x 3 m room. Walls are 2.7 m high, doors and windows total 3.33 m², 2 coats, coverage 10 m² per litre.

  1. 1. Perimeter = 4 + 3 + 4 + 3 = 14 m
  2. 2. Paintable area = 14 x 2.7 - 3.33 = 34.47 m²
  3. 3. Paint = 34.47 x 2 coats / 10 = 6.89 L, plus 10% = 7.58 L, round up to 8 L
  4. 4. 4 L tins = 8 / 4 = 2 tins

Buy 8 litres, which is 2 tins of 4 L.

Common mistakes to avoid

  • Forgetting the second coat.
  • Using a coverage figure from a different brand. Read your tin.
  • Painting the ceiling with wall figures. Run the ceiling separately as its own area.
How it's calculated
  • Paintable area = wall length × height − doors and windows
  • Litres = area × coats ÷ coverage × (1 + wastage/100), rounded up
  • 4 L tins = litres ÷ 4, rounded up; 20 L buckets = litres ÷ 20, rounded up