Free site calculators

From foundation to finishes, get your numbers right.

Nineteen free calculators for students, interns and young engineers. Each one explains the basics, shows you how to use it step by step, and works through a real site example.

19 calculatorsStep-by-step guidesWorked examplesFree, no sign-up

01 · Foundation

Excavation Volume

Every building starts with a hole in the ground. This calculator tells you how much soil comes out of a trench or pit, how much space it takes once it is dug, and how many lorry trips it takes to cart it away.

Use it for

  • Pricing the digging of foundation trenches
  • Booking tipper lorries for cart-away
  • Checking a contractor's excavation quantities
Bank volumeLoose volumeTipper trips
Use the calculator
Worked example

Trench for a 4 × 3 m room, 0.6 m wide, 1 m deep

10.5

m³ to cart away

See how it is worked out

02 · Structure

Concrete Quantities

Turns the size of a slab, beam, column or footing into what you actually buy: bags of cement, sand and ballast. Pick the mix from your drawing and it does the rest.

Use it for

  • Ordering materials before a concrete pour
  • Estimating the cost of a slab
  • Checking site usage against the order
Cement bagsSand in m³ and tonnesBallast in m³ and tonnes
Use the calculator
Worked example

5 × 4 m slab, 150 mm thick, mix 1:2:4

20

bags of cement

See how it is worked out

03 · Structure

Rebar Weight

Steel is bought by weight but drawn by length. This calculator converts bar size and length into kilograms, so you can order steel or check a delivery note in seconds.

Use it for

  • Ordering reinforcement from a supplier
  • Checking steel deliveries on site
  • Quick checks on a BBS total
Weight per metreTotal weight in kgNumber of 12 m bars
Use the calculator
Worked example

30 bars of Y12, each 4 m long

106.67

kg of steel

See how it is worked out

04 · Structure

Bar Bending Schedule

Build a full bar bending schedule from your structural drawing. Enter each bar mark and shape, and it works out cutting lengths to BS 8666, weights and how many 12 m bars to order.

Use it for

  • Preparing a BBS for the steel fixer
  • Learning how cutting lengths are worked out
  • Pasting a ready schedule into Excel
Cutting lengthsWeight per bar sizeTotal steel weight
Use the calculator
Worked example

112 Y8 links for four 230 × 450 beams

1,275

mm cutting length each

See how it is worked out

05 · Structural analysis

Beam Analysis

Before you design a beam you need the forces inside it. Enter the span, a UDL and a point load, and get the support reactions, the maximum shear force and the maximum bending moment for a simply supported beam or a cantilever.

Use it for

  • Checking hand calculations for class and exams
  • Getting the design moment for a lintel or beam
  • Understanding how loads turn into moments
Support reactionsMaximum shear forceMaximum bending moment
Use the calculator
Worked example

6 m beam, 10 kN/m UDL and a 20 kN point load

67.22

kNm maximum moment

See how it is worked out

06 · Structure

Slab Reinforcement

Enter the slab panel size and the bars on the drawing, such as Y12 @ 150 main and Y10 @ 200 distribution. It counts the bars in each direction, gives every bar length and the total steel weight to order.

Use it for

  • Ordering slab steel for a floor
  • Checking a steel fixer's bar count
  • Understanding one-way and two-way slab steel
Bars each wayBar lengthsTotal steel weight
Use the calculator
Worked example

4 × 5 m panel, Y12 @ 150 and Y10 @ 200

180.49

kg of steel

See how it is worked out

07 · Structure

Beam Reinforcement

Top bars, bottom bars and links for a set of identical beams. Link cutting lengths follow BS 8666 shape code 51, so the numbers match what the steel fixer cuts.

Use it for

  • Ordering steel for ground and floor beams
  • Preparing link cutting lengths
  • Checking beam steel quantities
Main bar weightLinks per beamLink cutting length
Use the calculator
Worked example

Four 5 m beams, 230 × 450, 3Y16 + 2Y12, Y8 @ 200

187.26

kg of steel

See how it is worked out

08 · Structure

Column Reinforcement

Main bars with their laps for the next floor, plus links, for a set of identical columns. Get the bar lengths, link cutting length and the total weight.

Use it for

  • Ordering column steel floor by floor
  • Working out starter bar and lap lengths
  • Checking column link quantities
Main bar length with lapLinks per columnTotal steel weight
Use the calculator
Worked example

Six 3 m columns, 230 × 230, 4Y16, Y8 @ 200

165.55

kg of steel

See how it is worked out

09 · Structure

Lap and Anchorage Length

How far must two bars overlap, and how far must a bar run into a support? Pick the bar size and concrete grade and get lap and anchorage lengths from BS 8110.

Use it for

  • Checking laps on site before a pour
  • Answering a fundi's 'how much do we overlap?'
  • Adding laps to a bar schedule
Tension lapCompression lapAnchorage lengths
Use the calculator
Worked example

Y12 bar in C25 concrete

480

mm tension lap

See how it is worked out

10 · Structure

Formwork Area

Works out the formwork contact area for slabs, beams, columns and walls, then the number of 8 × 4 ft plywood sheets to buy, allowing for reuse and wastage.

Use it for

  • Pricing formwork for a pour
  • Ordering plywood sheets
  • Planning formwork reuse across floors
Contact area in m²Area per elementPlywood sheets
Use the calculator
Worked example

5 × 4 m slab, 150 mm thick

22.7

m² of formwork

See how it is worked out

11 · Structure

Staircase

Enter the floor-to-floor height and get the number of risers, the exact riser height, the treads, the total going and the pitch, with a comfort check on every stair.

Use it for

  • Setting out a stair on site
  • Checking an architect's stair design
  • Class projects on stair design
Risers and treadsExact riser heightPitch and comfort check
Use the calculator
Worked example

3,000 mm floor to floor, 175 mm max riser

18

risers of 166.7 mm

See how it is worked out

12 · Walling

Blocks for a Wall

The question we get asked most: how many blocks do I need? Enter the wall size, doors and windows, and your block size. It allows for mortar joints and breakages.

Use it for

  • Ordering blocks or machine-cut stones
  • Budgeting walling for a house
  • Checking a fundi's block count
Total blocksNet wall areaBlocks per m²
Use the calculator
Worked example

4 × 3 m room, 3 m high, one door and one window

472

blocks

See how it is worked out

13 · Walling

Plaster Quantities

Once the walls are up, they need plaster. This works out the cement and sand for any wall area, thickness and mix ratio.

Use it for

  • Ordering cement and sand for plastering
  • Comparing internal and external plaster costs
  • Planning materials per room
Cement bagsSand in m³Wet and dry volume
Use the calculator
Worked example

77 m² of wall, 15 mm, mix 1:4

9

bags of cement

See how it is worked out

14 · Roofing

Roofing Sheets (Mabati)

Counts the roofing sheets for a lean-to or gable roof using the real covered width of each sheet after overlap. It also gives roof area and ridge capping length.

Use it for

  • Ordering mabati cut to length
  • Budgeting a roof
  • Checking a supplier's quote
Total sheetsSheets per slopeRoof area and ridge capping
Use the calculator
Worked example

10 m gable roof, 4.5 m sheets

30

sheets

See how it is worked out

15 · Finishes

Floor Tiles

Enter the room size and tile size, and get the number of tiles, boxes and bags of tile adhesive, with wastage for cuts and breakages already included.

Use it for

  • Buying tiles for a room or a whole house
  • Avoiding a short order and colour mismatch
  • Quick quotes for clients
Tiles neededBoxesAdhesive bags
Use the calculator
Worked example

3.6 × 3 m bedroom, 600 × 600 tiles

9

boxes of tiles

See how it is worked out

16 · Finishes

Wall Paint

Works out how much paint your walls need after taking away doors and windows, for any number of coats, then tells you how many tins or buckets to buy.

Use it for

  • Buying paint for a room or building
  • Comparing brands by coverage
  • Budgeting finishes
Litres of paint4 L tins20 L buckets
Use the calculator
Worked example

4 × 3 m room, 2.7 m high, 2 coats

8

litres of paint

See how it is worked out

17 · Services

Water Tank Capacity

Find the capacity of a rectangular or round water tank in litres, and how many days of water it stores for a household.

Use it for

  • Sizing a water tank for a house
  • Checking an underground tank design
  • Explaining storage to a client
Capacity in litresDays of storageJerricans to fill
Use the calculator
Worked example

3 × 2 m tank, 1.5 m water depth

9,000

litres

See how it is worked out

18 · Lab testing

Concrete Cube Test

Turn the crushing loads from the lab into concrete strength in N/mm², get the average of three cubes and see how it compares with the grade on the drawing.

Use it for

  • Reading a lab cube report
  • Material testing practicals
  • Early warning on weak concrete
Strength of each cubeAverage strengthPercentage of grade
Use the calculator
Worked example

Three 150 mm cubes at 520, 540 and 505 kN

23.2

N/mm² average

See how it is worked out

19 · Every day

Unit Converter

Drawings in mm, plots in feet and acres, loads in kN, concrete strength in MPa. Convert any of them instantly and see the value in every unit at once.

Use it for

  • Converting plot sizes from feet to m² and acres
  • Reading imperial dimensions on old drawings
  • Turning tonnes into kN for load checks
Length, area and volumeMass and forcePressure and stress
Use the calculator
Worked example

A 50 × 100 ft plot

464.5

m²

See how it is worked out

Want to understand the site, not just the numbers?

The Civil Engineering Student Handbook takes you from classroom theory to real site practice.