All calculators

Plaster Quantities

Cement and sand for internal and external plaster.

Step 1 · New to this? Start here

The basics

Plaster is a thin layer of cement-sand mortar on a wall. To find the materials, think of it as a very thin slab: wall area x plaster thickness gives the wet volume of mortar.

Like concrete, the dry materials shrink when mixed with water and pressed onto the wall, so we multiply the wet volume by 1.27 to get the dry volume you actually buy.

The mix ratio, for example 1:4, means 1 part cement to 4 parts sand. The dry volume is shared out in that ratio, and the cement part is turned into 50 kg bags (one bag is about 0.0347 m³).

Plaster area
The wall surface you are covering, after deducting doors and windows. Count each side of a wall separately.
Thickness
Usually 12 to 15 mm internal and 15 to 20 mm external.
Mix 1:4
1 part cement, 4 parts sand. Common for internal plaster. External plaster is often richer, such as 1:3.
Dry volume
Wet volume x 1.27.

Step 2

How to use this calculator

  1. 1Work out the area to plaster. Use the net wall area (after doors and windows). If both faces of a wall are plastered, double it.
  2. 2Enter the plaster thickness in mm, usually 15.
  3. 3Choose the mix ratio from the specification.
  4. 4Leave wastage at 5% unless you expect more.
  5. 5Read the cement bags and the sand in m³.

Step 3 · Enter your numbers

Results

Cement (50 kg bags)
12 bags
Sand
1.60 m³
Wet volume
1.58 m³
Dry volume
2.00 m³

Estimates for learning and planning. Always confirm quantities with your engineer or quantity surveyor.

Step 4 · Check your understanding

Worked example

The room from the Blocks example has 38.67 m² of net wall. We plaster both faces, 15 mm thick, in a 1:4 mix.

  1. 1. Area = 38.67 x 2 = 77.34 m²
  2. 2. Wet volume = 77.34 x 0.015 = 1.16 m³, plus 5% = 1.22 m³
  3. 3. Dry volume = 1.22 x 1.27 = 1.55 m³
  4. 4. Cement = 1.55 x 1/5 = 0.309 m³, and 0.309 / 0.0347 = 8.9, round up to 9 bags
  5. 5. Sand = 1.55 x 4/5 = 1.24 m³

Order 9 bags of cement and about 1.24 m³ of sand.

Common mistakes to avoid

  • Plastering one face in the numbers but both faces on site. Decide which faces get plaster before you calculate.
  • Entering thickness in metres. This box is in mm, so type 15, not 0.015.
  • Not deducting doors and windows.
How it's calculated
  • Wet volume = area × thickness/1000 × (1 + wastage/100)
  • Dry volume = wet volume × 1.27
  • Mix 1:n → Cement bags = (dry × 1/(1+n)) / 0.0347, rounded up
  • Sand = dry × n/(1+n)