HomeAbout UsMissionVisionCore ValuesWhy UsWho We ServeProductsMerchandiseLibraryFree ToolsArticlesFAQ & Contact
Library  /  Codes and Standards Guide
Library guide

Codes and Standards Guide

Every beam, slab and cube test you meet in class or on site is backed by a code. This guide explains the British Standards and Eurocodes used in Kenya, what each one covers, and where you will actually meet it.

34codes explained
BS to ECequivalents mapped
Kenyadocuments included

Which codes are used in Kenya?

In simple terms.. you will meet three families of documents. Knowing which family a project uses is the first question to ask before you open any calculation.

British Standards

What most of us learned

Codes like BS 8110 and BS 5950 were withdrawn in the UK in 2010, but they are still taught in many Kenyan colleges and used in many design offices. You will see them on a lot of existing drawings.

Eurocodes

Where the industry is moving

The Eurocodes (EN 1990 to EN 1999) replaced the old British codes. The Kenya Bureau of Standards has been adopting them with a Kenyan National Annex for local wind and earthquake values. New projects and software increasingly default to them.

Kenya documents

The local rules

The National Building Code 2024 has been in force since 1 March 2025. Roads follow the Ministry's Road Design Manuals, updated in 2025. KEBS and East African standards cover materials like cement.

Browse the codes

Search by code number or topic. Each card tells you what the code covers, its newer equivalent and where you will meet it.

No code matches that search. Try a code number like 8110 or a topic like slab.

British Standard to Eurocode map

If your notes use a BS code and the project uses Eurocodes, this is where to look.

TopicBritish StandardEurocode
Basis of designWithin each BS codeBS EN 1990 (EC0)
Loads and windBS 6399, BS 648BS EN 1991 (EC1)
ConcreteBS 8110, BS 8007BS EN 1992 (EC2)
SteelBS 5950BS EN 1993 (EC3)
CompositeBS 5950-3BS EN 1994 (EC4)
TimberBS 5268BS EN 1995 (EC5)
MasonryBS 5628BS EN 1996 (EC6)
FoundationsBS 8004BS EN 1997 (EC7)
EarthquakeNoneBS EN 1998 (EC8)
BridgesBS 5400EN 1991-2, 1992-2, 1993-2
Concrete testingBS 1881BS EN 12350, BS EN 12390

How to read a code clause

Codes feel heavy because nobody shows you how to read them. Use this four step method every time.

Find the right part

Codes are split into parts. BS 8110 Part 1 is design, Part 3 is design charts. Check the part before the clause.

Read the scope

Every clause starts by saying when it applies. Skipping this is the most common student mistake.

Check the symbols

Look up every symbol in the notation section. fcu in BS 8110 and fck in Eurocode 2 are not the same thing.

Follow the references

Clauses point to tables and other clauses. Follow every reference before you use a value.

Example from class to site: Your drawing says "cover 25 mm". The code clause behind it links cover to exposure condition, concrete grade and fire resistance. So on site, a slab exposed to weather may need more cover than an internal slab even when both use C25 concrete. That is why you check the drawing notes, then the code, before you approve spacers.

Keep learning

Put the codes to work with the rest of the Library.

This guide is a learning summary. Always design and approve work from the official, current edition of the code your project specifies.